Simple snowman

After a long break Loll and the team have brought back the CAS Christmas challenge where July’s theme is snowman. As I've gone die cut heavy, I’m combining with the Die Cut Divas for my second play there this month where the focus is on Christmas in July.

I die cut all the pieces for my snowman from white card and coloured with a combination of Copics and coloured pencils before assembling. As I wanted my snowman to face left and the scarf cuts with the longer bit that side, I flipped it over and smoothed down the edges with a bone folder before colouring. He has a little bit of chalk blush on his cheeks and a hand drawn smile. I used a white paint pen to make tiny dots all over his face for a slightly textured look and used Enamel Accents to make his eyes shine. The holly on his hat was stamped and fussy cut. 

Once I’d stamped the sentiment and stuck the snowman down with some scrap card underneath to raise him up just a tiny bit, I decided it needed something a little extra so tucked in some die cut snowflakes and added a few sequins. I finished off with my usual single rounded corner.

Stamps:
Christmas Sayings (Katzelkraft, no longer with us)
Christmas Joy (Crafty Secrets, no longer with us)

Paper: Bristol board

Ink: Versafine by Tsukineko (Onyx Black)

Other:
Cool Yule dies (Tim Holtz/Sizzix)
Snowflake die (Waltzingmouse Stamps, no longer with us)
Copic markers
Coloured pencils
Posca paint pen (white)
Enamel Accents by Ranger (black)
Clear iridescent sequins
Black fineliner
Corner Chomper

Ornamental

I’m playing again at the Lost Coast Designs Christmas in July challenge and this time I’ve combined with the current challenge at Retro Rubber where we have a sketch to play with and Die Cut Divas who are also focusing on Christmas in July.

I thought it might be fun to put the Bubbles Border stamp to a different use and decided to use it as a pattern on some Christmas ornaments. The dies are really light bulbs but I figured if I only used the solid layer, they’d double up as teardrop ornaments. 

A combination of gold embossing, red watercolour paint, Wink of Stella, Glossy Accents and some tiny nail art gems makes for richly textured and opulent little baubles! I stamped and gold embossed the border and then die cut the parts of the pattern that seemed to fit best. I got six out of the border so I have another three to play with another time.

The square elements of the sketch are hand drawn with a copper gel pen, the ornaments are raised just a tiny bit with some card scraps and I tied some crochet thread through the hanger of each. I did stamp the sentiment directly on the card base but I managed to then drop the stamp back onto it so rather than start the card again, I stamped onto a slightly modified die cut and used that. I added a couple of decorative score lines to add a bit of interest to the white space of the sketch and gently rounded both corners (yes both, unusual for me!).

Stamps:
Bubbles Border (Lost Coast Designs, I’ve had mine since 2011)
Branch of pine small and Sentiment (Lesia Zgharda)

Paper: Bristol board

Ink:
Versamark by Tsukineko
Memento Luxe by Tsukineko (Love Letter)
Tim Holtz Distress ink by Ranger (Pine Needles)

Other:
String of lights dies (MFT)
Detail gold embossing powder
Watercolour (Winsor & Newton)
Wink of Stella (clear)
Glossy Accents by Ranger
Nail art gems
Crochet thread
Stitched rectangle dies A6 size (Paper Rose)
Corner Chomper 

Thanks for stopping by! Links to all the challenges if you would like to play along with any of them:

Citrus birthday

Well outside my comfort zone with lots of die cuts today. I also did a bit of fussy cutting as I don't have dies for the bottle stamps -- it's such an easy outline to cut out I didn't feel they were necessary for me as I'm quite happy with a pair of scissors.

I'm combining challenges again, this is my second card for the Retro Rubber Taste of Summer challenge (feature fruit) and Die Cut Divas has an "anything goes" challenge this month. I don't usually do AG challenges but as this is die cut heavy and that's not my natural habitat I'm making an exception! 

I just don’t have the “clustering” sensibility that a crafter like my online buddy Natty has so it takes forever when I attempt it.

The bottle is stamped with just two inks even though there are three layers — the detail layer I stamped with DOX Evergreen Bough and then the next layer is Mint Julep stamped three times for darker coverage and the final layer is the same ink stamped just once. The elements are raised to various levels with card scraps so that things tuck neatly behind each other and they’re all arranged on a background I smooshed and splattered with Tumbled Glass ink. A few clear and iridescent sequins give it some finishing sparkle. 

Stamps:
Lemon Blossom and Bottled Up (both 2019, The Greetery)

Paper: Bristol board

Ink:
Tim Holtz Distress Oxide by Ranger (Evergreen Bough)
Hero Arts Shadow Ink mid tone (Mint Julep)
Jenni Bowlin ink by Ranger (Lemon Drops)
Adirondack by Ranger (Sunshine Yellow) 
Tim Holtz Distress ink by Ranger (Picked Raspberry, Spun Sugar, Tumbled Glass)
Brilliance by Tsukineko (Pearlescent Chocolate)
Memento Luxe by Tsukineko (Bahama Blue)
Versafine by Tsukineko (Onyx Black)

Other:
Lemon Blossom Dies (The Greetery)
Sequins

Thanks for stopping by, links to details of the challenges I played are here:

Happy New Home!

The Die Cut Divas challenge this month is all about celebrations, so I decided to concentrate on die cutting and embossing for a card to celebrate a move to a new home when my hubby asked if I could make something for him to give to friends.

Last time I made a new home card, I observed I didn’t have anything like a pot plant which would have filled a space in the layout. I fixed that by picking up a couple of MFT die sets from someone having a crafty de-stash on eBay and I’ve used several of them here. I used Copics to colour the pots (I went with traditional terracotta) and the foliage and then added a little sparkle with a Spica glitter pen. I thought a white embossed brick wall might make it look like a whitewashed conservatory. The sentiment is computer generated and cut with a stitched rectangle die to make “shelves” for the pots.

Supplies:
Potted Plants and Plants & Pots die sets (MFT)
Brickwork 3D embossing folder (Tim Holtz/Sizzix)
Copic markers
Spica glitter pen (green)
White paint pen (Posca)
Stitched rectangle dies A6 size (Paper Rose)
Bristol board

What are you celebrating? Whatever it is, if you use a die or an embossing folder, why not share with the Die Cut Divas here

Blooming birthday

I’m combining challenges again — this time it’s the new Time Out challenge (pick at least two from: pastel, earth, rain, hope, bloom, tree) and Die Cut Divas who are looking for birthday or anniversary cards this month (this is my second card). 

I chose pastel, bloom and rain from the Time Out list as my starting point. I did a light watercolour wash for the background, die cut the flower and ferns and coloured with a mix of chalks and Copics then assembled a little cluster. The daisy head has a couple of cardstock scraps behind it to give it a bit of "lift". I stamped a sentiment and finally added a fairly liberal scattering of Glossy Accents dots and a few tiny clear gems to represent a spring shower of rain. I don’t usually work well with pastels so this was a stretch, I’m sort of happy with it but still not quite convinced! Perhaps I should have gone with just bloom and rain and stuck with stronger colours.

Stamps: Say it All (Hero Arts, retired)

Paper: Watercolour

Ink: Memento by Tsukineko (Bamboo Leaves)

Other: 
Wildflower Stems 1 dies (Tim Holtz/Sizzix)
Fern Valley dies (Arden Creative Studios, Maker series)
Stitched rectangle dies A6 size (Paper Rose)
Copic markers 
Chalks
Watercolours (Winsor and Newton)
Glossy Accents by Ranger
Nail art gems

Thanks for stopping by! Links to the challenges if you’d like to join in:

Spring is in the air

The northern hemisphere has entered meteorological spring and the Die Cut Divas would like to see some signs of the new season in our projects this month.The challenge provided a perfect starting point for a birthday card I needed to make.

A couple of months back I bought a bundle of Lisa Horton products on eBay which included a pretty buttercup set. As they generally start flowering in March I thought that might be a good place to start. I’m still enjoying playing with some dark backgrounds so I added my stencilled, die cut and embossed spray of buttercups to a black card base with a white heat embossed sentiment and a frame drawn with a white paint pen and given some smudgy, chalkboard sort of corners with a white pencil.

I only used two ink colours on the stencilling, one yellow and one green, which sort of made up for the amount of other stuff taking up real estate on my desk! The camera hasn't picked up the shading details of the green leaves very well but it's the best I could manage.

Paper: Bristol board, smooth black

Ink: Adirondack by Ranger (Sunshine Yellow), Memento by Tsukineko (New Sprout)

Other:
Buttercup Bloom bundle (3D folder, outline die, layering stencils — Lisa Horton Crafts)
Sentiment from Enjoy Quotes (Katzelkraft, no longer with us)
Bright white embossing powder (Wow!)
White Posca paint pen
White pencil
Corner Chomper

Thanks for stopping by! 

Pink Christmas

It might seem odd that my first card of 2026 is a Christmas card but I’m going to make a determined effort to play along with Christmas Kickstart this year so I hope I’m starting as I mean to go on. Jo’s guest elf this month is the lovely Chris Lawler who has chosen a colour theme — pink! Not a colour I naturally gravitate to but I did my best to embrace it!

The Christmas wording dies got their first outing here so I’m playing at Die Cut Divas too where the theme is New. Although I’ve had them a while this is the first time I’ve even opened the packaging so I hope that counts! I used them to cut hot pink glitter card to stick to an inky background then stood my fussy cut bear on top of the wording, I hope she's light enough on her feet not to squash it! 

I sprinkled a few tiny die cut stars and some white pen dots around the place, mounted with a broad border and called it done. The confetti die used for the stars is ancient (I’ve had it at least ten years) but very useful! The bear’s raised paw has a couple of layers of cardstock scraps behind it so it’s a got just a wee bit of dimension.

Stamps:
Polar Bear Pals (MFT)

Paper:
Pink glitter card 
Bristol board 

Ink: 
Brilliance by Tsukineko (Graphite Black)
Momento Luxe by Tsukineko (Rosebud)
Tim Holtz Distress Oxide by Ranger (Picked Raspberry)
Adirondack by Ranger (Raspberry)

Other:
Stylish Script Christmas Wishes dies  (Lisa Horton for Creative Expressions)
Confetti die (Mama Elephant)
Stitched rectangle dies A6 size (Paper Rose)
Copic markers
Posca paint pen (white)

Thanks for stopping by!

Christmas roses

In a change of pace — something more on the elegant side and very die-based compared to my usual stampiness! I’ve had this set for years and barely used it so thought it was about time it got a proper workout.

This started life in my head as a white on white creation with a silver sentiment.  I couldn’t make the florals look anything but bland though (I don’t know how others pull it off for gloriously chic creations!). I ended up going through every sort of colouring medium and eventually binning them and starting again! This time the flowers are cut from red card, edges inked with Distress and a little bit of detail added with a white pencil. The rest was cut from white and coloured with Copics with a tiny bit of pencil on the holly veins. 

I heat embossed the gold sentiment then added the frame and assembled everything in the corner, using scraps of card to vary the heights, and finally called it done. 

I confess it reminded me why I don’t do this style of card very often — it doesn’t come naturally and takes me longer than seems humanly possible 😂 It’s a good job I know the intended recipients will appreciate it!

Stamps:

Noel (Waltzingmouse Stamps, no longer with us)

Paper:
Bristol board
Red

Ink:
Brilliance by Tsukineko (Graphite Black)
Versamark
Holtz Distress ink by Ranger (Barn Door)

Other:
Christmas roses dies (Sue Wilson/Creative Expressions)
Branch die (Craft Emotions)
Stitched square frame dies (Paper Rose)
Detail embossing powder (gold)
White pencil

With so many die cuts, it would be rude not to join the Die Cut Divas’ Christmas/winter challenge, don’t you think? Click the graphic for all the challenge details.